UCP-822-PL Electropneumatic Transducer Environmental Sensor

Description

Description
Power Supply 22-30VDC, 20-30VAC, 47-63 Hz, 150mA max. average, 350mA peak
Control Input 4-20mA, (0-10V, 0-5V; jumper selectable), Tri-State, PWM
Input Impedance 4-20mA, 250Ω; 0-5/0-10V, 10kΩ
Manual Override Digital pushbutton adjust, switch-selectable mode
Alarm Contact 100mA@30VAC/DC (pressure loss, manual mode, jumper selectable)
Accuracy 1% F.S.; combined linearity, hysteresis, repeatability @20°C ambient
Operational Temp. Range 41° to 140°F (5°C to 60°C)
Temp Coefficient ±0.1%/°C
Operating Environment 10-90% RH, non-condensing -4°C to 60°C
SCIM 523 in3/min@45 psi; 8520 cm3/[email protected] kPA;
333 in3/min@20 psi; 5407 cm3/[email protected] kPA
Supply Pressure Minimum: 0.1 psi plus user F.S. pressure; maximum: 45 psig
Control Range User programmable zero selectable from 0-25psi: Full Scale 0-25psi
Pressure Differential 0.1 psig (supply to branch)
Pressure Indication Electronic, 3-1/2 digit LCD back-lite
Minimum Tubing Length 15-feet
Port Connection 1/8 i.d. poly tubing
Media Connection Clean dry air or inert gas. Not for use with
oxygen service or combustible gases