Alicat BB9, 9-position multi-drop breakout box for RS-232, With Cables

Description

Alicat BB9, 9-position multi-drop breakout box for RS-232, With Cables
Comes with unit, double ended DB8 8-pin cable and double ended D-sub 9-pin cable. In good working condition, surplus equipment. Note that this does not have a USB port.
Info from
here
and
here
(buyer to confirm):
Multi-Drop Breakout Boxes
Power and communications for up to 9 Alicat instruments
Alicat’s BB3 and BB9 multi-drop breakout boxes make building your own local flow control network easy. Control up to 9 Alicat flow or pressure instruments from a single computer or programmable logic controller (PLC) connection. Breakout boxes also distribute power to all connected devices from a single power source. Each BB3 and BB9 is built into a light, yet rugged, composite chassis that can be mounted in any orientation via its 3/16″ diameter mounting holes.
Compatible with instruments that have 8-pin mini-DIN or 6-pin locking industrial connectors.
Communicate with all devices digitally via a single USB or serial cable.
Distribute power to all devices with a single power source.
Multiple breakout boxes can be daisy-chained to control up to 26 instruments.
Communications
Connect your BB9-232 to a computer or PLC using one of the methods below. You may connect multiple BB9-232’s to support up to 26 instruments.
USB 2.0 (USB A-B cable included)
RS-232 9-pin serial port (cable included)
Terminal block transmit and receive sockets (RX/TX)
Power
Connected devices receive power from the BB9’s common power bus. Power connected at any point in the system is distributed to all devices.
Connect a PVPS24U power supply (not included) to the BB9’s barrel-type power jack (max 1.5 amps).
Connect a PVPS24U power supply (not included) to any instrument to distribute power to the rest (max 2 amps).
Free wire power to the BB9’s terminal block power and ground sockets (max 16 amps).
Dimensions:
7.625″ x 5.125″ x 1.625″ (19.3 x 12.9 x 3.9 cm)
Weight:
0.6 lb (0.3 kg)
8-pin mini-DIN cables (DC series)
Wire colors for 8-pin mini-DIN cables are labeled according to our standard
8-pin mini-DIN pinout
:
Black – primary 4-20 mA current analog output
Brown – secondary analog output (if used, DC only)
Red – RS-232 digital serial input
Orange – setpoint input or remote tare (via grounding)
Yellow – RS-232 digital serial output
Green – primary 0-5, 1-5 or 0-10 volt DC analog output
Blue – DC power input
Purple/White – ground
9-pin and 15-pin D-sub cables (DB series)
Double-ended D-sub cables
Double-ended (female-female) D-sub cables can be used to connect Alicat instruments with male D-sub connectors to programmable logic controllers (PLC’s) and other devices with the same connector.
_gsrx_vers_856 (GS 7.0.20 (856))